Practical guides · Kent homes

Understand the moisture before choosing the fix.

Clear, practical notes on damp, condensation, mould and water getting into homes. These guides can help you decide what to observe and what to ask; they cannot diagnose a property without an inspection.

Damp or condensation: what clues can help?

Dark marks, peeling paint and a musty smell tell you that something needs attention, but they do not identify the source by themselves. Condensation is moisture from indoor air settling on a surface that has become cold enough. A leak, rain entering through a defect, plumbing trouble or moisture at low level can create some similar-looking damage.

Notice when and where the marks appear. Condensation is often more noticeable on cold surfaces, around windows or in rooms where moisture is produced and ventilation is limited. A patch that changes after rain, appears below a gutter or opening, or follows a pipe route may justify checking for water entry. These are clues to investigate, not proof of a cause.

Keep a simple record: dates, weather, room use, heating and ventilation, and whether the area changes. Photograph the same area from the same position. Avoid covering a persistently damp patch before the source has been considered, since that can hide changes or trap moisture.

Ventilation and steady heating can help reduce condensation risk, but they will not repair a leak or an external defect. If the cause is unclear, get the wall and surrounding building details assessed before paying for a treatment.

Read how we assess condensation and mould →

What a moisture meter reading can—and can’t—tell you

A handheld meter can help compare readings across areas and highlight places that may need closer attention. The number is not, on its own, a diagnosis of rising damp, a leak or any other single cause. Readings can be affected by the material, salts, metal, surface finishes and the way the instrument is used.

A useful assessment looks at the wider pattern: the height and shape of the affected area, wall construction, nearby plumbing, outside ground levels, gutters and downpipes, pointing and render, and whether the marks vary with weather or room conditions. Where accessible, both sides of the wall and adjacent rooms may add context.

Be cautious if a report relies on a few meter readings without explaining what was inspected, what other causes were considered and what evidence supports the proposed work. Ask what is known, what remains uncertain and what would change the recommendation.

Sometimes a first visit cannot confirm an intermittent or hidden source. In that case, further checks or monitoring may be more sensible than committing immediately to an invasive treatment.

See our damp investigation process →

Tracing water ingress: observations to make safely

Water may travel before it becomes visible indoors, so the mark on a ceiling or wall is not always directly below the entry point. If it is safe, note whether the problem occurs during or after rain, whether wind direction seems to matter, and whether it changes after plumbing or heating is used.

Look from the ground for obvious external clues such as overflowing gutters, a displaced downpipe, damaged pointing, cracks in render, failed seals around openings or raised ground against a wall. Do not climb onto roofs or disturb electrical fittings. If water is near electrics, avoid the area and contact a qualified electrician; if there is an active plumbing leak, isolate the supply if you can do so safely and contact a plumber.

Take dated photographs inside and outside and keep notes about rainfall and when the area becomes wet. A brief dry spell does not rule out a leak, and a single wet reading does not establish where the water came from. Dye testing can be useful in some controlled drainage investigations, but the right method depends on the suspected route and materials; random dye use can stain surfaces and may not give a reliable answer.

When the source is uncertain, investigate the route before repairing finishes. A proportionate inspection should explain what was checked, what could not be accessed and what further step would provide useful evidence.

Read about water ingress checks →

Every property needs its own assessment.

This page is general information, not a diagnosis or a substitute for an inspection. If you tell us what you have noticed and when it happens, we can discuss a sensible next step.